Relay2 – new Raspberry Pi Zero add-on board

September 29, 2016

Relay2 is my latest RPi Zero add-on board. It’s designed to control low voltage and small-ish current devices such as DC motors, servos etc.

rpi0_piio_relay2_small

Relay2 is a 2-ch Relay board with two Change-Over (CO) relays. Each relay is good for 30V AC/DC at 1A. The relays can handle a greater voltage than 30V but given the close proximity of the actually RPi Zero board I would not recommend going above 30V. The relays are easy to select via GPIO headers and they use 3-way Screw Terminals.

You’ll find them on our Tindie store real soon.

Advertisements

Two new Raspberry Pi Zero add-on boards

August 30, 2016

I’m very pleased to show off our latest Raspberry Pi Zero add-on boards.

RPio_PIIO_ADC16_UserP0rt_small

The board in the top of the picture is PIOO UserP0rt which features a 16-ch port expander and 8-ch ADC using the MCP23S17 and MCP3008 ic’s.

While the board in the bottom of the picture is PIIO ADC16 which is a 16-ch ADC board and features 2x MCP3008 ADC’s (each 8-ch, 10-bit).

You’ll find them on our Tindie store real soon.


Piio’s and MiniPiio’s boards are now for sale on Tindie

October 29, 2013

Pii and MiniPiio Boards are now for sale on Tindie

Details are here:

https://www.tindie.com/stores/DTronixs/