New RC2014 boards: RS232 and 8052

I got a bumper box of PCB’s in the post today, just in time for Maker Faire UK 2018 this weekend (29th/30t April 2018).

Inside the box were some new RC2014 boards. The first two new PCB’s were my respins of a Z80 SIO/2 serial board and a Raspberry Pi Zero terminal board, as well as two brand new designs.

The first brand new board was a RC2014 RS232 breakout board allowing TxD1/RxD1 and/or TxD2/RxD2 serial signals from the RC2014 bus to be driven at RS232 levels.

The second brand new PCB was a new 8052 CPU board. This is a bit of an experimenters board as the 8052 bus architecture doesn’t directly map onto the Z80 bus architecture. When using the 8052 CPU some of the Z80 control bus signals (!M1, !MREQ, !IORQ etc.) will need pulling low via jumpers when attempting to make use of other cards. So why all the fuss. Well, the 8052 CPU does have the excellent the 8052-BASIC available which does make it a fun and a powerful (in 1980/1990 micro terms 🙂 ) system.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: