Setting up RPi MIDI #2

In a previous post on setting MIDI baud-rates on the RPi I used a slight of hand (i.e. init_uart_clock etc.) to trick the RPi in setting the UART to a 31250 baud needed for MIDI. While browsing the Raspberry Pi forum I spotted this nugget of information from PhilE:

in config.txt add:

enable_uart=1
dtoverlay=pi3-miniuart-bt
dtoverlay=midi-uart0

 

This combination does three things:

1) Enables the UART. It isn’t strictly necessary when combined with pi3-miniuart-bt
2) Reassigns the weaker UART (ttyS0) for Bluetooth and frees ttyAMA0 for our MIDI interface
3) Using an DT overlay to achieve the same UART clock settings as our init_uart_clock etc. trick

It makes things a lot simpler 🙂

Advertisements

One Response to Setting up RPi MIDI #2

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: