Relay2 is my latest RPi Zero add-on board. It’s designed to control low voltage and small-ish current devices such as DC motors, servos etc.
Relay2 is a 2-ch Relay board with two Change-Over (CO) relays. Each relay is good for 30V AC/DC at 1A. The relays can handle a greater voltage than 30V but given the close proximity of the actually RPi Zero board I would not recommend going above 30V. The relays are easy to select via GPIO headers and they use 3-way Screw Terminals.
You’ll find them on our Tindie store real soon.