I should have called this post “yet-another RPi MIDI board” as it’s includes my third iteration of a MIDI interface for the Pi. But YARMB doesn’t actually trip off the tongue đŸ™‚
So here we have a new RPi MIDI board. Briefly its spec is:
- MIDI IN via 5-W DIN Connector
- MIDI OUT via 5-W DIN Connector
- 3.3V Operation
- HAT foot print (65 x 56mm).
- Four fixing holes.
- ID EEPROM (not fitted)
In addition to the RPi MIDI, there’s also a MIDI break out board (BoB) board. It’s spec is:
- MIDI IN via 5-W DIN Connector
- MIDI OUT via 5-W DIN Connector
- MIDI THRU via 5-W DIN Connector
- On board 5V Voltage Regulator
- Size 80 x 49mm.
- Four fixing holes.
Is this board on your Tindie store? Do you plan on doing another production run? If not do you know of an analog? I intend to use the MIDI OUT to control a MeeblipSE and the IN to control a Processing drawing using the MIDIBus library.
Soon. I’ve been busy with a Kickstarter campaign at the moment.
Which board was of interest?
Would you be interested in designing a custom MIDI Hat on commission?