Raspberry Pi (Beeb) UserPort HAT

Of the recent Pi boards I’ve made I think UserPort is probably my favourite. It’s a mimic of the BBC’s micros digital User Port and Analogue Port.

Back in the 80’s (gosh that sounds old) I built many electronic, robotic and other projects using the Beebs digital User Port and Analogue so reproducing their functionality for the Pi was a pleasure.

Digital I/O is provided by a I2C MCP23017 16-channel Port Expander

20W IDC Connector
1 3.3V
2 CB1
3 3.3V
4 CB2
5 GND
6 PB0
7 GND
8 PB1
9 GND
10 PB2
11 GND
12 PB3
13 GND
14 PB4
15 GND
16 PB5
17 GND
18 PB6
19 GND
20 PB7

Analogue Inputs by a 4-channel SPI MCP3004 10-bit ADC.

15W D Connector

Pin
1 3.3V
2 GND
3 GND
4 ADC CH3
5 GND
6 GND
7 ADC CH1
8 GND
9 N/C
10 I1
11 N/C
12 ADC CH2
13 I0
14 N/C
15 ADC CH0

Check my other stuff on Tindie

Advertisements

2 Responses to Raspberry Pi (Beeb) UserPort HAT

  1. bunsenh says:

    For your next trick … a Pi to Tube interface?

    • zuzebox says:

      That would be a cool project 🙂
      Checking the details of the “Tube”

      It needs 8 data lines, 7 address lines, and an interrupt input. Add a 5V to 3.3V converter circuit so it’s definitely doable on a RPi 🙂

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: