MiniPiio PCB (Batch #2) board’s arrive

We received our second batch of PCB’s from our manufacturer today.

In the package were 4 sets of blank PCB’s for the MiniPiio boards: MiniPiio_RS232 (v0.2) , MiniPiio_ULN2803 (v0.2) and two new board MiniPiio_Relay2 and MiniPiio_293D.

MiniPiio_Relay2 is a two relay board with dual change over relays and MiniPiio_293D is a Full-H Bridge motor controller based on the venerable 293D chip. More details to follow.

About these ads

This entry was posted on Wednesday, August 8th, 2012 at 9:58 pm and is filed under DesignSpark, Electronics, MiniPiio, Prototypes, Raspberry PI. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.

3 Responses to MiniPiio PCB (Batch #2) board’s arrive

Coley says:

August 11, 2012 at 11:00 am

Looking good!

Reply
- zuzebox says:
  
  August 13, 2012 at 12:40 pm
  
  Thanks Coley, How’s your things going?
  
  Reply
Coley says:

August 14, 2012 at 9:18 pm

Got sidetracked with Prop/Pi combo. Have used the protoboard you sent me and put a prop on it, programmed directly from the UART. SimpleIDE running on raspbian is great!

Reply